APP软件性能效率研究

性能效率是APP软件的重要质量属性，但目前缺乏APP软件性能效率的通用模型。分析了APP软件的性能特征，基于ISO/IEC 25010标准提出了APP软件的性能效率模型，定义了APP软件性能效率的子特性和度量指标。基于提出的APP软件性能效率模型，通过实验对APP软件的性能效率进行了度量及相关分析。     

Business intelligence and analytics use,innovation ambidexterity,and firm performance: A dynamic capabilities perspective

To survive in a dynamic and hyper-competitive business environment, firms are compelled to simultaneously introduce incremental and radical innovations. While it is recognised that business intelligence and analytics (BI&A) can support innovation and provide organisational value, the literature provides a limited understanding of its impact on balancing different innovation activities and ensuring performance gains. In this study, we examine the relationship between BI&A use, innovation ambidexterity, and firm performance by relying on the process theory of IS value creation as well as the dynamic capabilities perspective. We test our model using data collected from medium- and large-sized firms in Slovenia, applying partial least squares modelling. The results support the notion that BI&A use is positively associated with successful balancing between explorative and exploitative innovation activities, which in turn enhances firm performance. Our results also indicate that innovation ambidexterity is enhanced in two ways: indirectly through interaction with the firm’s absorptive capacity, and directly by increasing the possibilities of faster experimentation with offerings of products or services and improved predictability of the value of new products or services.     

高效液相色谱法测定多环芳烃的出峰顺序探讨

目的探讨水﹑气﹑土壤中多环芳烃检测标准(HJ 478-2009﹑HJ 647-2013、HJ 784-2016)的正确出峰时间和顺序。方法用高效液相色谱来对苊烯、芴、苊、?、苯并(a)蒽进行定性分析,并与3个标准中的出峰顺序进行比较。结果苊烯、苊、芴、苯并(a)蒽、?的出峰时间分别为6.450、7.923、8.233、17.760、18.740min,与标准HJ478-2009﹑HJ647-2013的出峰顺序存在差异。结论在使用标准HJ478-2009﹑HJ647-2013、HJ 784-2016同时测定16种多环芳烃时,多环芳烃的出峰顺序及时间应以HJ 784-2016为准。     

硬质道路石油沥青关键组分的研制

筛选出适合制备硬质道路石油沥青关键组分的减压渣油，并以此为原料，考察了蒸馏深拔、深度氧化及溶剂脱沥青工艺制备的硬质道路沥青关键组分的性能。所制备的关键组分能够大幅提升基质沥青的高温性能，且通用性好；将关键组分与基质沥青按适合比例调合可以稳定生产高温性能好的硬质道路石油沥青，其混合料耐高温性能好。同时,为便于硬质沥青关键组分的使用,还开发了关键组分的造粒成型技术,提出其适于成型造粒的黏度范围为0.6～6 Pa?S。采用关键组分生产的硬质道路沥青用于高速公路实体工程，经过2年以上的气候和通车考验，沥青路面无车辙、无开裂，保持优良的使用性能。     

Multiple Chemical Features Impact Biological Performance Diversity of a Highly Active Natural Product-Inspired Library

A systematic, diversity-oriented synthesis approach was employed to access a natural product-inspired flavonoid library with diverse chemical features, including chemical properties, scaffold, stereochemistry, and appendages. Using Cell Painting, the effects of these diversity elements were evaluated, and multiple chemical features that predict biological performance diversity were identified. Scaffold identity appears to be the dominant predictor of performance diversity, but stereochemistry and appendages also contribute to a lesser degree. In addition, the diversity of chemical properties contributed to performance diversity, and the driving chemical property was dependent on the scaffold. These results highlight the importance of key chemical features that may inform the creation of small-molecule, performance-diverse libraries to improve the efficiency and success of high-throughput screening campaigns.     

Al-Ga-Mn-Ca-Cu合金电极碱性体系电化学性能

通过熔铸、压延、退火等一系列工艺制作了新型Al-0.017Ga-0.885Mn-0.038Ca-0.048Cu (wt.%)阳极合金，并通过了EIS、极化曲线分析研究了其在不同浓度NaOH溶液中的腐蚀行为和电化学性能。结果表明，随着NaOH浓度的增加，合金阳极的自腐蚀速率在逐渐增加，Al-0.017Ga-0.885Mn-0.038Ca-0.048Cu合金在4mol/LNaOH溶液中的腐蚀速率增长速度明显降低，放电电压在电流密度为120mA/cm2下仍能维持在1 V左右，阳极能量密度也最高，达6.056kW?h/kg，更适合不同电流密度下的连续恒流放电。且合金的恒流放电和EIS结果与腐蚀特性吻合较好。     

基于镧锶锰氧化物基阴极的中温固体氧化物燃料电池的性能优化研究

为了提高基于镧锶锰氧化物(LaxSr1-xMnO3,LSM)阴极的中温固体氧化物燃料电池(Solid Oxide Fuel Cell,SOFC)的电化学性能,文章利用CuO清扫Ce0.85Sm0.15O2-δ(SDC)晶界的SiO2杂质以提高SDC的离子电导率,制备了复合电解质材料SDC-CuO,并将SDC-CuO和LSM结合成复合阴极材料,随后分别制备了以LSM和LSM/SDC-CuO作为阴极的SOFC,并研究了这两种SOFC的电化学性能。研究结果表明:在开路电压和工作温度为800℃的条件下,LSM/SDC-CuO基阴极的SOFC的极化电阻为0.14Ω·cm2,明显低于LSM基阴极SOFC的极化电阻(0.36Ω·cm2);LSM/SDC-CuO基阴极的SOFC的最大输出功率密度为237 mW/cm2,显著高于LSM基阴极的SOFC的最大输出功率密度(132 mW/cm2)。     

水泥辊压机终粉磨系统的工业化应用

介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。     

New ways to improve the damping properties in high‐performance thermoplastic vulcanizates

The incorporation of viscoelastic materials represents an effective strategy to reduce the vibratory level of structural components. Thermoplastic vulcanizates (TPVs) are a special type of viscoelastic material that combines the elastomeric properties of rubbers with the easy processing of thermoplastics. In the present work, we propose innovative ways to improve the damping properties of high‐performance TPVs by using rubbers with carboxylic functionalities. For that, TPVs from physical blends of carboxylated hydrogenated acrylonitrile butadiene rubber (XHNBR) and polyamide 6 (PA6) were prepared. The chain dynamics of different mixed crosslink systems containing peroxide, metal oxides and hindered phenolic antioxidants were investigated in order to find the most suitable strategy to design a high‐performance TPV system with upgraded damping properties. The results indicate that the damping performance of the TPV system can be tailored by controlling the type and magnitude of the bonding interactions between the mixed crosslink system and the XHNBR rubber phase. Therefore, this study demonstrates the potential of TPV systems containing carboxylic rubbers as high‐performance damping materials. © 2020 Society of Chemical Industry     

Fabrication of poly(ε‐caprolactone) (PCL)/poly(propylene carbonate) (PPC)/ethylene‐α‐octene block copolymer (OBC) triple shape memory blends with cycling performance by constructing a co‐continuous phase morphology

In this paper, a triple shape memory material was prepared by ultra‐simple melt blending from poly(ε‐caprolactone) (PCL), poly(propylene carbonate) (PPC) and ethylene‐α‐octene block copolymer (OBC). The obtained material possessed a co‐continuous phase morphology and presented an excellent triple shape memory effect (triple‐SME). Theoretical prediction demonstrated that a special continuous phase morphology could be constructed by adjusting the proportions of the blend. Moreover, the results indicated that a close relationship existed between the phase morphology and the triple‐SME of PCL/PPC/OBC. The sample with 35 vol% PPC content contributed to the formation of a continuous phase morphology and exhibited the optimal triple‐SME. Additionally, the sample PCL/PPC/OBC (32.5/35/32.5) showed outstanding structure and performance stability during cycle loading–unloading tests, which evidenced the prominent cycling shape memory property (nearly 100% shape fixing and recovery of temporary shape). Overall, this work could provide an efficient, convenient and recyclable method to obtain high‐performance shape memory materials. © 2020 Society of Chemical Industry